YELLOW JACKET, Refrigerant Recovery Pre-Filter KIT Part#121615636

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
YELLOW JACKET, Refrigerant Recovery Pre-Filter KIT Part#121615636
***Please Note: The filter may be Grey, Blue or even black depending on our suppliers, the color means nothing.
All will be the CO32 series and all will be 1/4" male flare.
YELLOW JACKET, Refrigerant Recovery Pre-Filter KIT
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
It uses a STANDARD 1/4 x 1/4 male filter, you can use ANY size filter as long as it is 1/4" male flare.
The extension hose that COMES WITH this kit allows for some room between the recovery unit inlet and the pre-filter.
INCLUDES;
(1) 032,  1/4" Male x 1/4" Male Pre-filter
(2) Red 1/4" Hose screw-in plugs
(2) 1/4" caps with straps
(2) Brass cap for 1/4" flare with internal seals
(2) shrader valve stems
(1) Brass valve core tool, this can also be used as a cap.
"Same as"
PROMAX
Filter Conversion Kit
Our kit replaces the INPUT swivel fitting used on the PROMAX RECOVERY MACHINES. These swivel fittings were known to LEAK or crack at the swivel joint!
Allows Use of Common Male to Male Filter Drier.
Protect your expensive piece of recovery equipment with this inexpensive kit!!
***Please Note: The filter may be Grey, Blue or even black depending on our suppliers, the color means nothing. All will be the CO32 series and all will be 1/4" male flare. YELLOW JACKET, Refrigerant Recovery Pre-Filter KIT If you own a refrigerant/refrigerant recovery/recycle unit then you know how important it is to take care of it. Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor. If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit. Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter. This kit takes care of both of those problems. It uses a STANDARD 1/4 x 1/4 male filter, you can use ANY size filter as long as it is 1/4" male flare. The extension hose that COMES WITH this kit allows for some room between the recovery unit inlet and the pre-filter. INCLUDES; (1) 032, 1/4" Male x 1/4" Male Pre-filter (2) Red 1/4" Hose screw-in plugs (2) 1/4" caps with straps (2) Brass cap for 1/4" flare with internal seals (2) shrader valve stems (1) Brass valve core tool, this can also be used as a cap. "Same as" PROMAX Filter Conversion Kit Our kit replaces the INPUT swivel fitting used on the PROMAX RECOVERY MACHINES. These swivel fittings were known to LEAK or crack at the swivel joint! Allows Use of Common Male to Male Filter Drier. Protect your expensive piece of recovery equipment with this inexpensive kit!!
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
YELLOW JACKET, Refrigerant Recovery Pre-Filter KIT Part#121615636
***Please Note: The filter may be Grey, Blue or even black depending on our suppliers, the color means nothing.
All will be the CO32 series and all will be 1/4" male flare.
YELLOW JACKET, Refrigerant Recovery Pre-Filter KIT
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
It uses a STANDARD 1/4 x 1/4 male filter, you can use ANY size filter as long as it is 1/4" male flare.
The extension hose that COMES WITH this kit allows for some room between the recovery unit inlet and the pre-filter.
INCLUDES;
(1) 032,  1/4" Male x 1/4" Male Pre-filter
(2) Red 1/4" Hose screw-in plugs
(2) 1/4" caps with straps
(2) Brass cap for 1/4" flare with internal seals
(2) shrader valve stems
(1) Brass valve core tool, this can also be used as a cap.
"Same as"
PROMAX
Filter Conversion Kit
Our kit replaces the INPUT swivel fitting used on the PROMAX RECOVERY MACHINES. These swivel fittings were known to LEAK or crack at the swivel joint!
Allows Use of Common Male to Male Filter Drier.
Protect your expensive piece of recovery equipment with this inexpensive kit!!
***Please Note: The filter may be Grey, Blue or even black depending on our suppliers, the color means nothing.
All will be the CO32 series and all will be 1/4" male flare.
YELLOW JACKET, Refrigerant Recovery Pre-Filter KIT
If you own a refrigerant/refrigerant  recovery/recycle  unit then you know how important it is to take care of it.
Most of the damage that occurs to recovery units is from foreign material entering the recovery unit and damaging the compressor.
If your recovery unit has a ""OIL-LESS" compressor, it is even more critical that you prevent foreign material from entering the unit.
Now comes the delema that some recovery owners face.......there is simply not enough room to screw on a pre-filter and then your hose, or you have to use a expensive male x female pre-filter.
This kit takes care of both of those problems.
It uses a STANDARD 1/4 x 1/4 male filter, you can use ANY size filter as long as it is 1/4" male flare.
The extension hose that COMES WITH this kit allows for some room between the recovery unit inlet and the pre-filter.
INCLUDES;
(1) 032,  1/4" Male x 1/4" Male Pre-filter
(2) Red 1/4" Hose screw-in plugs
(2) 1/4" caps with straps
(2) Brass cap for 1/4" flare with internal seals
(2) shrader valve stems
(1) Brass valve core tool, this can also be used as a cap.
"Same as"
PROMAX
Filter Conversion Kit
Our kit replaces the INPUT swivel fitting used on the PROMAX RECOVERY MACHINES. These swivel fittings were known to LEAK or crack at the swivel joint!
Allows Use of Common Male to Male Filter Drier.
Protect your expensive piece of recovery equipment with this inexpensive kit!!